NZ’s Fastest & Smartest Push-To-Fit Water Reticulation System

Innovative push-to-fit water reticulation fittings that revolutionizes installation without the need for tools

Image of BRUN-T Tee fitting with push-to-fit design for easy installation.

Simple, Push-To-Fit Configuration

Simply push the fittings onto the pipe ends, or onto each other and you’re done – no tools required!

Image of BRUN-T Tee Fitting, highlighting a simple push-to-fit irrigation system designed for easy installation.

Omnidirectional
Fittings

BRUN-T Fittings are unique in the way that they are Omni Directional. They can be twisted and face any direction and make up any solution required by the installer.

Image of a BRUN-T tee fitting designed for a push-to-fit irrigation system, showcasing its innovative design and user-friendly features.

Tamper Resistant
Design

BRUN-T Fittings are tamper resistant by design with lock keys to guarantee your water reticulation systems are tamper-free.

To ensure Brun-T Push-To-Fit fittings perform correctly and deliver a long-lasting, reliable installation, follow these essential steps:

  1. Cut the pipe end squarely and cleanly, ideally using a dedicated pipe cutter for best results.
  2. Deburr and chamfer the pipe end with a suitable chamfering tool before inserting the pipe into the fitting.
  3. Clean the pipe end thoroughly to remove any dirt, debris, or contaminants. Foreign material entering the Brun-T fitting can damage the internal seal.
  4. Allow for thermal contraction and expansion to account for changes in pipe length due to temperature variations that could result in the pipe pulling on the fitting.
  5. Insert the pipe into the fitting straight and true to ensure there is no misalignment that can put irregular stress on the fitting or internal seal.
  6. Inspect the fitting and pipe connection after assembly to ensure a secure, leak-free joint. Verify that the grip and seating are proper and perform a functional test. If any misalignment, gaps, or evidence of leakage appears, disassemble and reassemble using clean components.

BRUN-T offers a wide range of irrigations solutions for any system. Each of the product categories below is available in 20mm, 25mm, and 32mm – best of all, it’s compatible with both LD and MD pipe.

  • BRUN-T Automatic Control Valve
  • BRUN-T Manifold Tee
  • BRUN-T Manifold Male Tee
  • BRUN-T Manifold Female Tee
  • BRUN-T Male Ball Valve
  • BRUN-T Female Ball Valve
  • BRUN-T End Cap
  • BRUN-T Pipe Plug
  • BRUN-T Unlock Key, Pipe Cutter & Chamfer Tools

BRUN-T is an innovative push-fit system that revolutionizes installation without the need for tools. These designs surpass industry standards by ensuring a secure, leakproof connection. BRUN-T’s push-fit expedites installation by effortlessly securing fittings onto LD & MD pipes using stainless steel teeth.


Logo of D'TIL in white text on a transparent background.

orders@dtil.nz
09 272 4212